Siemens SITRANS F M Intermag 2, Руководство по эксплуатации

Страница: 53 / 130

Operation
5-5
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
The available device functions and parameters are shown in the
second line of the display. You can select them there with the
and
operating elements. You can scroll in the selected device function or
setting level of the parameters (Enter function) with . It is possible
to exit the selected function or setting level to the level above with .
The currently valid setting appears after selecting the setting level of a
parameter. The programmable value flashes in the second line of the
display when programming is enabled (section 5.2.2). You can change
the parameter setting in this position. You have to decide between the
following types of input to enter data.
S
Direct numeric input
S
Input from given table
In the numerical input, the and operating elements have the
function of a cursor control. The selected digit flashes. You can now set
the desired digit or move the point to the right or left with the
and
operating elements. Digits are input with carry over to the next
highest place. After selecting the last digit you terminate the input by
pressing the
operating element. The entered value is accepted if it is
within the permissible input range. In this case the user guidance re•
turns to the selection menu for the parameters of the group concerned.
If the entered value is rejected, an error message briefly appears on
the display and then the previous setting. You can then change it
again.
In section 5.2.4 you will find an overview of all the functions and para•
meters with factory setting and setting options.
Note !
If the and operating elements are kept actuated (with your finger
continuously on the glass panel) the numeric value or setting option is
changed continuously when using the tabular selection. A numeric
input carries over to the next highest position.
If you want to prevent an accidentally changed setting from becoming
active, you can exit the menu item by pressing the
operating
element several times (return to the operating level above).