Siemens SITRANS F M Intermag 2, Руководство по эксплуатации

Страница: 59 / 130

Operation
5-11
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
Menu
code
Device function,
Parameters Description Factory setting
(display only) Setting options
2. Diagnostics
2.1 Device status Device status, error
messages (”OK” or error
messages)
2.2 Electr.Check Supervision of electrodes
in sensor Inactive
Active, Inactive
2.3 EmptyTube Det. Time interval for
immersion check of
electrodes or deactivation
of immersion check.
In case of insufficient
immersion of both
electrodes in conductive
medium, ’Tube empty’ is
reported under device
status. Inactive
Inactive, 15 s,
30 s, 60 s, 120 s,
300 s
2.4 Device Test
2.4.1 Self Test Check device status
(duration approx. 60s)
2.4.2 Display Test Visual check of local
display
2.5 Simulation
2.5.1 Flow Simulation of a flow value;
effects all outputs,
totalizers, limit values and
display.
”F” flashes in the top right
of the display during
simulation and
”Simulation” is displayed
under device status.
Value Simulation value in % of
full scale value 0 % -110% to
+110%
Time Duration of simulation
After expiration of this time
or with input of ”End” the
normal measuring mode is
resumed End End, 10 min,
30 min, 60 min
2.5.2 Dig. Out.1 Simulation of output signal
at the digital output 1 End End, 0.1 Hz,
1 Hz, 10 Hz,
100 Hz, 1 kHz,
10 kHz, Alarm
on, Alarm off
2.5.3 Dig. Out.2
1
Simulation of the output
signal at the digital
output 2 End Alarm on,
Alarm off
2.5.4 Analog Out.
1, 2
Simulation of the output
signal at the analog output 4 mA 4mA, 10mA,
12mA, 20mA,
failure signal
1
Parameters apply only to devices with 20 mA/Hart communication and digital output 2 (7ME5033-0xxxx)
2
Parameters apply only to devices with 20 mA/Hart communication and digital input (7ME5033-2xxxx)