Siemens SITRANS F M Intermag 2, Руководство по эксплуатации

Страница: 64 / 130

Operation
5-16
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
Menu
code
Device function,
Parameters Description Factory setting
(display only) Setting options
4. Device Outputs
4.1 Analog Out
1, 2
Analog output 4 to 20mA
with HART communication
4.1.1 Current limit Upper limit of analog
current 22 mA 20...22.5mA
4.1.2 Error signal Output current in case of
failure.
With the setting ”Hold ..s”
a current of 3.6 mA is only
output in the case of a
longer failure, shorter
failures are bridged with
output of the last valid
current 3.6 mA 3.6mA, 22mA,
24mA,
Hold
continuous,
Hold 5s, 20s,
40s, 60s, 120s,
240s
4.1 PROFIBUS
3
PROFIBUS
communication
4.1.1 Bus Address PROFIBUS address 126 1 to 126
4.1.2 Ident-Nr. Selection of appropriate
device database file
(GSD) Manufact.spec. Profile spec.,
Manufact.spec.
4.2 Digit.Output1 Frequency or pulse signal
for flow or alarm signal
4.2.1 Function Assignment of a function
to the output Pulse Pulse,
Frequency,
Alarm, Flow
direction forw.
Flow min, Flow
max, Flow
min/max,
Total. forw. max,
Total. rev. min,
Total. net max,
Total. net min
No function
4.2.2 Signal Type Definition of signal logic for
active event Passive-pos. Active-pos.,
1, 2
Active-neg.,
1, 2
Passive-pos.,
Passive-neg.
1
Parameters apply only to devices with 20 mA/Hart communication and digital output 2 (7ME5033-0xxxx)
2
Parameters apply only to devices with 20 mA/Hart communication and digital input (7ME5033-2xxxx)
3
Parameters apply only to devices with PROFIBUS communication (7ME5033-1xxxx)