Siemens SITRANS F M Intermag 2, Руководство по эксплуатации

Страница: 65 / 130

Operation
5-17
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
Menu
code
Device function,
Parameters Description Factory setting
(display only) Setting options
4.2.3 Pulse Rate Number of pulses per unit
of quantity
(only effective with ”Pulse”
function)
Engr. Unit Engineering unit of
quantity to which the
number of pulses refers DN1..12: Imp/l
>DN12: Imp/m
3
pulses/
l, m
3
, Ml, ft
3
,
Gal, MGal,
ImpGal, Mimp•
Gal,
kg, t, lb,
Pulse Rate Number of pulses per unit
of quantity Depending on
the nominal
width 10Imp/l...
1Imp/m
3
0.01 to 9999
pulses/unit
4.2.4 Pulse Width (only with ”Pulse”
function) +0.1 ms 0.1 to 2000 ms
4.2.5 Fullsc. Freq Frequency output at full
scale flow value at digital
output 1
(only effective for
”Frequency” function)
10000 Hz 2 to 10000 Hz
4.3 Digit.Output2
1
4.3.1 Function Assignment of a function
to the output Alarm Alarm, Flow dir.
forw., Flow min,
Flow max, Flow
min/max,
Total. forw. max,
Total. rev. max,
Total. net max,
Total. net min,
No function
4.3.2 Signal type Definition of signal logic for
active event Contact closes Contact closes,
Contact opens
4.3 Digit.input
2
4.3.1 Function Assignment of a function
to the input:
Measured value=0:
Measured value is set
to 0 (affects all
outputs
and totalizers)
Totalizer reset: reset+start
Measured value
= 0 Meas. val. = 0,
Total. forw.
reset,
Total. rev. reset,
Total. net reset,
Total. all reset,
No function
4.3.2 Signal Type Definition of signal logic High-active High-active,
Low-active
1
Parameters apply only to devices with 20 mA/Hart communication and digital output 2 (7ME5033-0xxxx)
2
Parameters apply only to devices with 20 mA/Hart communication and digital input (7ME5033-2xxxx)
3
Parameters apply only to devices with PROFIBUS communication (7ME5033-1xxxx)