Siemens SITRANS F M Intermag 2, Руководство по эксплуатации

Страница: 124 / 130

Appendix
7-16
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
Max_Module = 4
Max_Input_Len = 20
Max_Output_Len = 3
Max_Data_Len = 23
Fail_Safe = 0
Slave_Family = 12
Max_Diag_Data_Len = 20
;----------- Description of device related diagnosis: ---------------
;
Unit_Diag_Bit(16)
= ”Error appears”
Unit_Diag_Bit(17) = ”Error disappears”
Unit_Diag_Bit(24) = ”Hardware failure electronics”
Unit_Diag_Bit(25) = ”Hardware failure mechanics”
Unit_Diag_Bit(26) = ”Motor temperature too high”
Unit_Diag_Bit(27) = ”Electronic temperature too high”
Unit_Diag_Bit(28) = ”Memory error”
Unit_Diag_Bit(29) = ”Measurement failure”
Unit_Diag_Bit(30) = ”Device not initialized”
Unit_Diag_Bit(31) = ”Device initialization failed”
Unit_Diag_Bit(32) = ”Zero point error”
Unit_Diag_Bit(33) = ”Power supply failed”
Unit_Diag_Bit(34) = ”Configuration invalid”
Unit_Diag_Bit(35) = ”Restart”
Unit_Diag_Bit(36) = ”Coldstart”
Unit_Diag_Bit(37) = ”Maintenance required”
Unit_Diag_Bit(38) = ”Characteristics invalid”
Unit_Diag_Bit(39) = ”Ident_Number violation”
Unit_Diag_Bit(55) = ”Extension Available”
User_Prm_Data_Len = 0
;=========== Description of modules ==================================
;
; Use always the module order specified in this file.
; Use exactly one identifier per module.
; If you don t want to get the measuring value of a certain module
; from the device with the input data, use Free place for this module
; instead of another identifier.
;
; For the module 1 you have the choice between these different
; identifiers:
;
; - Free Place
; - Short identifier format (identifier byte)
; - Long identifier format (extended identifier)
;
; For the modules 2, 3 and 4 you have the choice between these
; different identifiers:
;
; - Free Place
; - Long identifier format (extended identifier)
; - Long identifier format, resettable (extended identifier)
;