Siemens SITRANS F M Intermag 2, Руководство по эксплуатации

Страница: 68 / 130

Operation
5-20
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
Menu
code
Device function,
Parameters Description Factory setting
(display only) Setting options
6.6 Zero Trim
6.6.1 Zero Flow Cor. Correction value for the
zero point of the flow
measurement in m/s 0 -1 to +1 m/s
6.6.2 Start Correct. Start of zero calibration;
The medium must be at
a standstill during
calibration!
6.7 Trim Parameter Values in 6.7.2.4 can only
be written if no SmartPlug
data can be read
6.7.1 Cal.factor User-specific calibration
factor;
the measured flow value is
multiplied by this factor
before output
(affects all outputs,
totalizers and display) 1.0 0.5 to 1.5
6.7.2 CFH
5
Calibration value for
hydraulic reference point
at 1m/s 400
6.7.3 ZPH
5
Calibration value for
hydraulic zero point 0
6.7.4 Excitat.Freq.
5
Magnetic field current
frequency depending on
sensor and power supply 6 Hz or f/8 3 Hz or f/16,
6 Hz or f/8,
12 Hz or f/4
6.7.5 EmptyTube Det. Adjustment of electrode
immersion check
Act.Value El1 Display of actual control
value of electrode El1 in %
of end value
Act.Value El2 Display of actual control
value of electrode El12 in
% of end value
Threshold Threshold of diagnostic
function ”Immersion
check” for ”Tube empty”
message (see table 5-2
and menu
2.3 )
33 % 5 to 95 %
2
Parameters apply only to devices with 20 mA/Hart communication and digital input (7ME5033-2xxxx)
5
Parameters apply only to devices with sensors without SmartPLUG
Table 5-1 Functions of the SITRANS FM Intermag 2 transmitter