manualshive.com logo in svg

Siemens SIPROTEC 7SJ61, Руководство пользователя, Страница: 237 / 454

Поделиться
Скачать
Siemens SIPROTEC 7SJ61 Скачать руководство пользователя страница 237

Functions

2.17 Auxiliary Functions

SIPROTEC, 7SJ61, Manual
C53000-G1140-C210-1, Release date 02.2008

237

2.17.9

Web Monitor

The Web Monitor facilitates the display of parameters, data and measuring values for SIPROTEC 4 devices 
during installation or during operation. It uses Internet technology for this purpose. The display is effected by 
means of a Web browser, e.g. the Internet Explorer.  

The SIPROTEC Web Monitor provides a variety of comprehensive device functions, other available functions 
are device-specific. For the 7SJ61 a phase diagram is implemented as specific function. Apart from general 
information regarding installation, this manual provides a description of specific functions of the SIPROTEC 
Web Monitor for 7SJ61 only. The general functions are described in the Help file of the DIGSI-CD (as from 
DIGSI V4.60). 

Prerequisites

The Web Monitor runs on the operator PC and requires only standard software. The following software pro-
grams / operating systems must be installed:  

Operating system: Microsoft Windows XP, Microsoft Windows 2000, Microsoft Windows NT, Microsoft 
Windows ME, Microsoft Windows 98 

Internet browser: Netscape Communicator Version 4.7, Netscape Communicator as from  Version 6.x or Mi-
crosoft Internet Explorer as from Version 5.0. Java must be installed and activated. 

Long-distance data transmission network: The required software component is included in Microsoft Windows 
XP, Microsoft Windows 2000, Microsoft Windows NT and Windows 98. This component is only required if the 
device is connected via a serial interface. 

Network adapter: The required software component is included in Microsoft Windows XP, Microsoft Windows 
2000, Microsoft Windows NT and Windows 98. This component is only required if the device is connected via 
a serial interface (possible for devices with EN 100 interface). 

2.17.9.1 General

During the commissioning phase, the device configuration created in the devices must be verified and their 
functions be checked. The Web Monitor provides support during the basic and clear determination and display-
ing of important measuring values. 

Discrepancies in the wiring or the configuration can be quickly found and solved.  

To run the Web Monitor, a link from the operator PC to the protection device via its front and rear operator in-
terface (service interface) is necessary. This can be done directly via the 9-pole DIGSI cable by means of an 
existing long-distance data connection. Remote access via a modem is also possible. An Internet browser must 
be installed on the operator PC (see paragraph on system requirements). DIGSI 4 is usually also installed on 
the operator PC. 

Please note that it must be ensured that DIGSI 4 and the Web Monitor do not use the same operator interface 
at the same time. A simultaneous serial access would lead to data collisions. This means that either DIGSI 4 
OR the Web-Monitor can use a device interface. Before the Web Monitor is started, DIGSI 4 must be exited or 
at least the settings and allocations in DIGSI 4 must have been finalized. It is possible to simultaneously 
operate DIGSI 4 at the front operator interface via a COM port of the operator PC and the Web Monitor at the 
rear operating interface via another COM port of the operating PC. 

Содержание SIPROTEC 7SJ61







































































































































































































































































































































































































































































Отзывы:

Нет отзывов