Siemens SINAMICS G120C, Руководство по эксплуатации

Страница: 334 / 470

3. Wait until STARTER reports that loading has been completed.
4. To save the data to the non-volatile memory of the inverter, select the "Copy RAM to ROM"
button: .
5. Go offline: .
You have transferred the settings from the PG to the inverter with STARTER.
Procedure with Startdrive without enabled safety functions
To transfer the settings from the PG to the inverter with Startdrive, proceed as follows:
1. Go online.
2. Select "Load to device" > "Hardware and software" from the shortcut menu.
3. Wait until Startdrive reports that loading has been completed.
4. Go offline.
5. Confirm the dialog box that then opens by clicking "Yes" to save the data to the non-volatile
memory of the inverter (Copy from RAM to ROM).
You have transferred the settings from the PG to the inverter with Startdrive.
Procedure with STARTER with enabled safety functions
To load the settings from the PG to the inverter with STARTER and to activate the safety
functions, proceed as follows:
1. Go online:
.
2. Click the "Download project to target system" button: .
3. Call the STARTER screen form for the safety functions.
You have transferred the settings from the PG to the inverter.
Saving settings and series commissioning
7.2 Saving the settings to a PC
SINAMICS G120C converter
334
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF