Operation
5.11 Configuration
FIDAMAT 6-G
Operating instructions, 07/2006, A5E00478463
5-49
5.11.6
ELAN configuration (function 73)
73 ELAN Config.
THC
Channel address:
O1
Measured value
telegram: on
Figure 5-51 Configuring ELAN
With this function, you set the parameters for an ELAN network.
Channel address:
Set the channel address here. Addresses from 1 to 12 can be set. In an ELAN network, each
address may be used only once.
Measured value telegrams on/off:
Here, you can switch the cyclic independent sending of measured values every 500 ms on or
off.
Note
Independent sending of measured values
When you have set up your own communication control system, this option offers a simple
way of checking an ELAN telegram. In order to avoid unnecessarily loading down the device
and the ELAN network, however, the function should only be switched on as needed!
Further ELAN details can be found in the ELAN interface description:
•
(C79000-B5200-C176 German)
•
(C79000-B5276-C176 English).
See also