SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 85 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
75
z The conveying distance is within 500 meter, it is not economical to use camion.
z The conveying driving speed is determined according to the road condition.
z In order to get good visibility and stability, the bucket should turn to its limit (bucket lift-ram
touch the upper limited block) and keep the pin connection point of lift-arm at transportation
position (400~500mm above the ground).
(4) Dumping Operation
z When dumping to camion or freight yards, raise the lift-ram to the position (forward tilt to the
maximum position) where the bucket does not touch
carriage or material pole, operate working equipment
control levers (or handle) to forward tilt the bucket to
dump, part or all of the material can be dumped by
lever control. Act slowly and gently during dumping
to prevent striking.
z
If the material sticks onto bucket, move the working
equipment control levers (or handle) cyclically to let the bucket tilt forward or backward to shake
down the material.
z After dumping, use the bucket to level equipment. Rear tilt bucket to level position, push forward
the working equipment control levers (or handle) to prepare for next operation.
(5) Pushing Operation
Level the bucket to the ground, push accelerograph to
move forward, if there is block during moving, raise the
lift arm a little and move forward continuously. When
operate the lift arm to lift the or lower, operate the
control lever between lifting and lowering operating.
Never let the lever at the raising or lowering position to
ensure pushing smoothly.
△
!
NOTICE
Watch the Torque Converter Oil Temperature Gauge all the
time during pushing. If the temperature is too high, stop to let
machine to cool down and then continue to work.