SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 84 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
74
front tires will deviate from the ground and skip.
z If there is too much material loaded into the bucket, it’s needed
to dump and title the bucket quickly to remove the excessive load
so as to prevent the material from dispersing during the
transportation.
„ Digging and Shoveling Material on Flat
Set the bucket edge leaning to the ground slightly as the following picture when digging and
shoveling material on flat, and be careful not to fasten the load to one side which will bring on
unbalance. This operation should be carried out carefully
with1st gear.
z
Set the bucket edge facing down slightly.
z When driving the machine forward, operate the working
equipment control levers (or handle) to let the lift arm
tilt forward to proper position so that it can the thin layer
of the surface each time when excavating the soil.
z when driving the machine forward, Shift the working
equipment control levers (or handle) back and forth
slightly to reduce the resistance
△
!
NOTICE
Keep the two sides of the bucket cut into material equably to
prevent single side work. Face the loader straight forward, never
let the angle exist between front and rear frame
(3) Conveying Operation
Conveys by itself under the following conditions:
z The ground is too soft and never been planed, the camion can not be used.