SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 43 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
33
systems before examine the hydraulic system.
z Never bend or beat the high pressure hydraulic pipe, never assemble the hard pipe and soft pipe
bended abnormally or broken.
z Examine the pipe system carefully (hard pipe and soft pipe), screw down the connectors
according to the proper torque. Do not examine the leak use hand but board, paper board. The
hydraulic liquid leak from hole which may be as small as pinhole may penetrate your muscle, this
may cause death. Please find the surgeon who is familiarity with hurt within several hours if
liquid splash down onto your skin.
z Make sure all the pipe clamps, protective board, and anti-heat cover is assembled properly to
prevent vibration and overheat due to friction with other part
z Choose proper container to hold liquid when replacing the hydraulic oil of hydraulic system and
cleaning the parts. Dealing of waste liquid please refer to “
8.20 Waste Liquid
” in this chapter
8.13 Anti-fire
z Shut the engine before adding fuel. No smoking and keep fire OFF during adding fuel.
z Keep fire OFF the storage place of fuel, grease or other flammable materials.
z Clean the flammable materials piles on the machine such as fuel, grease or other particles make
sure there is no oil cloth or other flammable materials.
△
!
NOTICE
Please replace under the following conditions:
z Connector is broken or leak.
z Dissever of outside of soft pipe is abrasive, steel wire of strengthen
layer is bare.
z Part of soft pip is upheaval.
z Soft pipe is obviously torque or staved
z Steel wire of strengthen layer penetrate the outside layer.
z The connector is misplaced.