SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 36 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
26
insulator)
To prevent accident, please do the following things:
z The height distance between loader and the electric wire should be
‹ At least 2m(6.5ft) at low voltage cases
‹ At least 4m (13ft) at high voltage cases
z Ask the electricity company first how to act according to the relevent rules when the machine
may touch the electricity cables.
z Wear rubber shoes and rubber gloves. Lay a leather cushion on operator’s shoes. Be sure no
part of our body could touch the metal bottom.
z Assign a signal warner, who can give the warnings when the machine get too close to electric
cables.
z Never leave the operator cab, never move, do not touch anything of machine until the people
who is on the ground cut off the electric once the machine touch the wire,
z When operating near High-Voltage cables, make sure other persons are far from the machine.
7 SAFETY PARKING
7.1 Pay Attention to the Safety of Yourself and Others
z Park the machine at plain ground. The working equipment should be put on the ground.
z Never park at clamp. If it is necessary, the clamp angle should be less than
20％.
z If the machine broken-down or need to park at surrounded place, put bars, signal, flags and
warning light. Make sure the other cars can see clearly. But do not block traffic.
z When parking the machine, unload all the material on the machine, low the buckel to the ground,
shut down the engine, pull the parking brake switch and put it at the braking position. Lock the
engine and keep the key well. Climb down the machine slowly according to “three point” method,
never jump down to the ground.
△
!
WARNING
NEVER get on or off the machine during driving.
7.2 Notice for Cold Area
z Clear the water, snow or dust attached on wires, switches, power insert or sensor and the covers