SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 68 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
58
¾ Neutral is used for maintaining at a certain position.
¾ Lower is used for lowering.
¾ Float is used for moving freely under applied force.
NOTICE
: Never put down the lift arm at Float position.
(2) Working Equipment Control Handle
Please see “
1.1 General View of Controls and Gauges Figure 3-2
”
This lever can control bucket and lift arm, there are four positions forward and backward, which are
used to operate the lift arm to lift, neutral, lower and float; there are 3 positions left and right that are
used to control the bucket Forward Tilt, Neutral, and Rear Tilt.
‹ Control Lift Arm
Push the working equipment control handle former and
rear can control the lowering, floating, holding and rising
of the lift arm.
— Lift is used for lifting.
— Neutral is used for maintaining at a certain
position.
— Lower is used for lowering.
— Float is used for moving freely under applied
force.
‹ Control Bucket
Push the working equipment control handle left and right can control the bucket Forward Tilt, Neutral,
and Rear Tilt.
— Rear Tilt is used for drawn in bucket
— Neutral is used for remaining at a certain position.
— Forward Tilt is used for dumping.
‹ Auto Level Function: After loader unload materials at the upper most position; put the control
lever at rear tilt position, the control lever will be locked by electromagnetism. During drawing
the bucket, when the bucket is at the auto-level position, the control lever will return to Neutral
position automatically, and then put the control lever at Lower position to put the working
equipment on the ground, the bucket will automatically stay at level state for digging. With this
automatic level function, the working efficient of whole machine can be improved greatly.
‹ Lift Limit Function: When the control lever is at lift position, lever will be locked by
electromagnetism; when the lift arm moves to the upper most point, lever will return to Neutral
position, to realize lift limit avoid hydraulic impulsion breaking the machine.