SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 22 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
12
separately. Do not allow unauthorized people to use.
z Electric welding and flame cutting is not allowed for the tubes containing flammable fluid. Clean
the tubes with nonflammable fluid before electric welding and flame cutting.
z During working, pay more attention to the operation, when the outlet of muffler is close to
flammable materials such as withered grass, old papers and etc.
z When parking the loader, carefully select the environment; especially select the places where
there are no flammable materials near the outlet of muffler.
z Check whether there is leak of fuel, lubricating oil, or hydraulic oil. If so, repair or replace the
broken items. Clean the repaired items before
using.
z There is explosive air generated near storage
battery, be sure there is no flame or fire nearby.
Repair and maintain the storage battery as
referenced in users manual.
z
Flame or fire (match or lighter) is not allowed to be used to check dark place.
z Fire extinguisher should be prepared and know how to use. Check and maintain it as referenced
in users manual.
z Never operate machine near flame or fire.
z Circuit short is not allowed.
3.5 Precautions When Operating at High Temperature
z Immediately after operations are stopped, the coolant, engine oil, hydraulic oil are at high
temperature and still under high pressure. Attempting to remove the cap, drain the oil or water, or
replace filters may lead to serious burns. Always wait for the temperature to go down, and follow
the specified procedures when carrying out these
operations.
z Stop the engine, waiting for the water to cool, and
then loose the cap slowly to relieve the pressure
before removing the cap of radiator.
3.6 Running on the way
z
Pay attention to the stability of the front and rare of the machine on the way, since there is work