Operation & Maintenance Manual
──
LG936 Wheel Loader
11
3.3 Mounting and Dismounting
z
Check the handrails and pedals, if there is oil, lubricant or dirt; clean them first to prevent slip.
Besides, repair the broken items, fasten the loosen
nuts.
z
Never
jump on or off the machine.
Never
get on or
off a moving machine.
z
When getting on or off the machine, face the
machine and use the handrails and pedals to ensure that you support
yourself. Maintain three-point contact (two hands –one foot or two
feet one hand) with the handrails and pedals to ensure body stable.
z
Never
hold any control levers (or control handles) when getting on or
off the machine.
z
Never
get into the operator cab from the ladder at the back of machine or from the tire at the side
of operator cab.
z
Never
hold any tools or other items when climbing up and down the loader, lift the tools needed
using rope to the operation flat roof.
3.4 Fire Prevention
The fuel used for engine, lubricant for loader engine, hydraulic oil for hydraulic system, Hydraulic
pressure shafting oil and gear oil for transmission system, brake fluid, antifreeze fluid for heat
elimina
tion
system are flammable, so it is very dangerous when the fire is close, especially for the fuel.
The following notice should be paid attention to.
z
Keep fire away from flammable fluids.
z
Add refueling and lubricating oiling in well ventilated
areas. Stop the engine and not smoke while refueling.
z
Tighten all fuel and oil tank caps firmly.
z
Put the above flammable liquid in certain container
with relevant tag and put it in fixing place to storage
Содержание LG936
Страница 120: ...110 Figure5 7 Electric System Theory Using YC6108G and TD226B Engine Machinery Control...
Страница 121: ...111 Figure5 8 Electric System Theory Using Weifang TD226B Engine Pilot Control Combined Switch...
Страница 122: ...112 Figure5 9 Electric System Theory Using Dongfeng CUMMINS 6BT5 9 Engine Pilot Control Combined Switch...