SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 49 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
39
z Keep the board surface clean, and there are no lubricant, oil, ice and incompact materials. Clean
the dirt of the tire.
z Never turn on the slope board. If it is necessary, turn outside the board and then drive back.
z Lock the direction mechanism after assembly, wedge the tire and pack the machine tightly with
cord.
9.2 Transportation on the Ground
z Obey the rules about weight, height, width and length prescribed in national and local laws for
transporting the machine using tow truck. Obey the traffic rules.
z Make sure the weight, height, width and length of machine before deciding the transport routine.
z Make sure the allowed limit of weight bearing when passing bridges or private buildings. Obey
the relative rules when driving on the public roads.
z The machine may be disassembled when using other transportations. Please contact with
Shandong Lingong construction machinery Co. Ltd. or their accredited representative
9.3 Lifting
Use the hook of front frame to transport the machine to
ship or train.
Select proper lifting equipment according to the weight
of loader, otherwise it is dangerous to surpass the weight
limit.
z Notice for lifting:
‹
Make sure the loader is at the transporting state.
The front and rear frame should be at the middle
position. Lock the machine using lock bar to prevent rotation of front and rear frame during
lifting.
‹
All the levers (or handles) should be at middle position.
‹ Shut the engine, lock all the equipment using key and then remove.
‹
No one should be at the operator cab.
‹ Never lift the machine using steel wire connecting the two hook of front frame.
‹
It is allowed to lift the machine using 4 steel wires with the same length (no short than 7m).
‹ Keep the machine horizontal during lifting.