SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 69 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
59
‹ Auto Lock Function: When the loader plough ground or strickle the ground, put the lever at
Float position, the control lever will be locked by electromagnetism to realize automatic lock; put
the lever at Float position, the lever will automatically return to Neutral position, which will
improve the working efficiency.
NOTICE
: Never put down the lift arm at Float position.
z
Brake Pedal
The Brake Pedal controls the brake of the wheels. See “
1.1 General View of Controls and
Gauges Figure3-1
、
Figure3-2
” in this chapter.
NOTICE
: When assembled two brake pedals
，
Never use left brake pedal during driving on ramp to
prevent the power being cut off to induce danger.
z
Accelerator Pedal
This pedal controls the accelerograph of the engine. See “
1.1 General View of Controls and
Gauges Figure3-1
、
Figure3-2
” in this chapter.
The engine speed can be freely regulated between low idling and full speed.
z Parking Brake Switch
This switch is on the top of operation box which is at the right side of operator cab and is used for
brake. Push this switch, to carry out parking brake, turn this switch gently until it rebounds to
eliminate parking brake.
z Flameout Control Soft Shaft(if assembled )
This soft shaft is at the right control box which is at the right side of seat. Pull this shaft, the engine
flame will be out.