SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 73 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
63
cooling temperature control switch to warm during winter.
— Clean the condenser frequently, use compressive air or cool water to wash. NEVER use
hot water or steam to clean.
— Use the condenser once per week during winter even the cool wind is not used for 1
minute to keep the air condition work fine.
—
Add antifreeze into coolant to prevent cold crack of part if the temperature is below 0 ℃ .
Let the coolant water out after the machine stops if the antifreeze is not used (please see
“3.5.3 Operation in Cold Weather”
in this chapter), add new water the next
time.
1.2.10 Adjustment of Cab’s Seat
△
!
WARNING
z When adjusting the cab’s seat, park the machine in a safe
place and stop the engine.
z Adjust the cab’s seat before starting operation or replacing
the operator.
z
Make sure that you can depress the brake pedal completely
when your back is against the seat backrest.
z Weight Adjustment
Weight adjust handle is at the middle bottom of the seat. Turn the
handle A counter-clockwise, the rigid of shock absorption will go
down; turn the handle A clockwise, the rigid of shock absorption will
go up. The Operator can adjust handle A according to his weight
until feel comfortable.
z Fore-and-Aft Adjustment
The handle is at the left bottom of the seat. Pull the handle B to adjust the seat forward or backward
until ideal position; it will be locked automatically after push it down.
z Backrest Adjustment
Pull the backrest adjust handle C to push the backrest until to the proper angle, and then release
handle to lock the angle.
z Height Adjustment
There are three weight positions, divided by three block position; the operator can adjust by himself
Hold the basement under the cushion, pull it steadily upward hard, the seat will be locked during