SDLG LG936 Скачать руководство пользователя страница 11

Страница: 11 / 122

Operation & Maintenance Manual

──

LG936 Wheel Loader

CHAPTER I SAFETY

△

WARNING

Read and follow all safety precautions. Failure to do may

result in serious injury or death.

1 SAFETY LABELS POSITIONS AND THE CONTENTS

1.1 Safety Label and Its Position

The positions of safety label of this machine please see the figure above. Please read the contents of

safety label carefully and follow the rules. Please keep the labels well, if there is any lost, broken or

unclarity of label please add new one or repair in time. If there is any component attached with safety

labels to be replaced, please make sure the new component has the same safety label.

When clean the safety label, please use cloth, soap water and etc, but the cleanser and gas is forbidden

to be used.

Figure 1-1 Figure of safety label position (Domestic Type)

Содержание LG936



























































































































Результаты поиска

Содержание LG936

Отзывы:

Бренды по названию

Популярные бренды

SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание LG936

Отзывы:

Бренды по названию

Популярные бренды