SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 48 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
38
the dirt and oil can erode the tire. No light, heat insulation and ventilation are needed for storage.
Cover the tires with canvas, plastic cloth or other anti-dust cloth. The wrong storage method can
reduce the quality and life of tire seriously.
z Stand the tire on the plane ground and use the wedge to forelock it to prevent it fall down once
there may be someone touch the tire without permission. The quality may reduce if the tire is put
use the side because it can be staved. The tire should be rotated (90
°
) once per month at least.
z Please stand aside if the tire will fall down. Never try to hold the tires since the tire of
engineering mechanism are general very heavy, otherwise you may be hurt seriously.
8.20 Waste Materials
Do as the follows to prevent pollution:
z Never dump the waste oil to places such as cloacae, river and etc.
z Contain the oil vented from the machine in a container; never dump the oil directly onto the
ground.
z Obey the relative rules and laws when deal with the harmful materials such as grease, fuel,
coolant, solvent, filter, storage battery and etc.
9 SAFETY TRANSPORTATION
9.1 Assemble and Disassemble the Machine
z Pay attention to assembling and disassembling since it is dangerous. Keep the engine speed low
during assembling and disassembling machine.
z Load and unload machine at plane ground and remain a certain safety distance to road side.
z Fix the tire well during assembling and disassembling machine to make sure it will not move. Put
cushion under the gangway.
z Slope boards should be strong enough with sufficient length and width to form a safe slope. The
angle with the ground should not larger than 15
°
. Remain some distance between slope board
and board, board and machine.
z Make sure the height of two sides of board is the same to ensure firm orientation.