Operation & Maintenance Manual
──
LG936 Wheel Loader
95
z
Always
fill the fuel tank after finishing operation to prevent the moisture in the air from
condensing and forming water inside the fuel tank.
z
If engine fails to suck fuel or the filters have been replaced just, bleed the air in the circuit.
2.1.2 Coolant
z
Use the clean and soft water, rain or tap water as coolant. Well water and spring water can be
used as coolant after soft processing and precipitation to avoid bringing scale which can influence
the performance of heat exchange.
z
If the engine overheats, wait for the engine to cool before adding coolant.
z
Add coolant to specified level. If the level is too low, it will cause overheating of engine system
and corrosion of cooling system.
z
Add antifreeze to coolant if ambient temperature is lower than 0 . Drain the coolant out after
℃
working (please see “
CHAPTER III 3.5.3 Operation in Cold Weather
”) and refill
before next working if there is no antifreeze in the coolant.
z
Antifreeze is flammable. Keep fire off when the antifreeze is added.
z
Never
use 100% antifreeze as coolant. Refer to the following table to select the mixing
proportion.
Proportion%
Name
Glycol Alcohol Glycerin Water
Proportion
Freezing
point
≤
℃
Glycol
60
55
50
40
40
45
50
60
Proportion in
volume
-55
-40
-32
-22
Alcohol
Glycerin
Antifreeze
30
40
42
10
15
15
60
45
43
Proportion in
weight
-18
-26
-32
2.1.3 Grease
z
Grease is used to prevent wear and noise on the joint surfaces.
z
Joints not included in the manual (connectors, jointing sleeves) are treated during overhaul, so
they do not need grease. When some parts become inflexible because of long-time operation, it is
necessary to grease them.
z
Remember to wipe off the overflow grease when adding grease.
2.1.4 The Storage of Oil and Fuel
z
Prevent water, dirt or other impurities from getting in.
z
Follow the rule that the oldest oil or fuel is used first to prevent any change in quality during
Содержание LG936
Страница 120: ...110 Figure5 7 Electric System Theory Using YC6108G and TD226B Engine Machinery Control...
Страница 121: ...111 Figure5 8 Electric System Theory Using Weifang TD226B Engine Pilot Control Combined Switch...
Страница 122: ...112 Figure5 9 Electric System Theory Using Dongfeng CUMMINS 6BT5 9 Engine Pilot Control Combined Switch...