SDLG LG936, Руководство по эксплуатации и техническому обслуживанию

Страница: 29 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
19
z Keep low speed so as to control easily at any time.
z Never drive fast, turn and brake suddenly at rugged, slippery or oblique ground.
z Drive at low speed when pass rough or rugged ground with blocks around, which may let the
control of steering wheel difficult. Loader may turn over if operate wrong.
z Let the engine run smoothly, never drive at high speed.
5.5 Ensure Good Visibility
z Slow the speed and sound the horn when necessary to let others know or find a director when the
visibility is bad or at the narrow crossing.
z Sand dust, big fog or storm may affect visibility. Slow the speed when visibility is bad. When
visibility is not good, stop work until good weather.
z Drive carefully when take long part which may block the visibility. Carefully lift, go forward and
backward, change speed. Never let the people get into the working space or find specific director.
z Keep the light on and drive at proper speed during
night which may produce illusion for height of
ground.
z Keep the front and rear head light and working light
on when working at dark area.
5.6 Pay Attention to Blocks
z If there are blocks (roof of buildings or the upper of door), never run into materials to be loaded
when turn the direction or pass.
z Pay attention to the environment when pass or turn at narrow area. Slow the speed to make sure
there is no block.
z Operate carefully when the ground is bad and load is not stable to prevent unstable load.
5.7 Drive at Bad Environment
z Do not operate by yourself at bad environment.
Investigate the condition of road, the strength of bridge,
landform of working area, geologic before working.
z Pay attention to sink of tire and the brake effect at
sloppy or soft ground.
z
When working in water or swampland, prevent the
bottom of the axle housing from being soaked. Drive at low speed after pass water or being