Scout MT-700 ENT, Руководство по эксплуатации

Страница: 32 / 155

МТ-700 fleet tracking system 32
Powering the tracker from the ignition wiring system is
strictly forbidden!
If the vehicle is equipped with the battery disconnect switch, make sure that the
terminal has no connection to a vehicle’s body, for example through the auxiliary sensors.
Incorrect connection may lead to the terminal failure.
Terminal failure caused by incorrect connection, configuration, negligent
use or unintended conditions
is not covered by a warranty .
Interface jack schematic:
The schematic is shown in the
Figure 28
:
Figure 28. Interface jack
Table 6
Number
on the
scheme
PRO/PRO285
STD ENT
Colour of
the wire
The wire’s
marking on the
plate
classification
The wire’s
marking on
the plate
Classification
The wire’s
making on
the plate
Classificatio
n
1 - (-) Power - (-) Power - (-) Power Black
2 RS-485 B RS-485 B RS-485 B RS-485 B RS-485 B
RS-485B
(SCOUTNet)
Blue
3 RS-232 TX RS-232 TX - - RS-485 B
RS-485B(LLS,
J1708, RFID)
Yellow-
green
4 CAN H CAN-H - - - - White
5 P0 D,A
Universal
input 0(with
voltage
measurement)
P0 D,A
Universal input
0(with voltage
measurement)
P0 D,A
Universal
input 0(with
voltage
measureme
nt)
Grey
6 P2+ D,F,C,A
Universal
input 2(with
voltage
P2+ D,F,C,A
Universal input
2(with voltage
measurement)
P2+ D,F,C,A
Universal
input 2(with
voltage
Yellow