Scout MT-700 ENT, Руководство по эксплуатации

Страница: 46 / 155

МТ-700 fleet tracking system 46
connection is activated and all the data will be transmitted until the main connection is
restored.
The duplicative connection is carried alongside the main connection. Data is transmitted
to both servers independently.
Sever Address
– IP-address or domain name of the server.
PORT
– Incoming port, configured in “SCOUT Server”.
Traffic Encryption
– enabling the terminal-server traffic encryption.
Disconnection threshold in Home Network (byte)
–the terminal initiates a connection to the
server and transmits data after the specified amount of data (in bytes) is accumulated. If the
parameter = 0 – then the terminal connects to the server after generating the first entry.
Home network connection interval (sec)
– the terminal initiates the connection after the
specified timeout, regardless of the amount of data accumulated.
Roaming connection threshold (byte)
– the terminal initiates connection to the server and
transmits data after the specified amount of data (in bytes) is accumulated. If the parameter = 0
– then the terminal connects to the server after generating the first entry.
Roaming connection interval (sec)
– the terminal initiates the connection after the specified
timeout, regardless of the amount of data accumulated.
The terminal only separates presence in the gateway national or international
roaming. While using the “native” operator, the terminal will use the home settings for the
home network.
Server protocol
– choosing the server’s exchange protocol.
5 options are available for МТ-700 PRO 285– ScoutData, ScoutOpen, EGTS, WialonIPS
and ScoutOpen2.
For МТ-700 Lite/Std/ENT only one option– ScoutData, For МТ-700 XXX Open - 5 options
– ScoutData, ScoutOpen, EGTS, WialonIPS and ScoutOpen2.
The main parameters can be specified using the SMS-command setserver with the
following parameters (1 main server, 2 и 3 duplication or reserved servers), protocol
(
scoutdata, scoutopen, scoutopen2, wips, egts
),
channel
(
gsm, wifi
),
IP-server address, port, encryption (1 - on, 0 –off), connection typr (m – main, d –
duplicate, r - reserved).
The command example:
setserver1 scoutdata,gsm,111.222.111.222,6700,crypto:1,m.
Terminal response: id(setserver1): OK
.