Scout MT-700 ENT, Руководство по эксплуатации

Страница: 78 / 155

МТ-700 fleet tracking system 78
Figure 81. Digital output parameters
Using the «Digital value» the following parameters can be configured: ( Figure 81 ):
ON
– activates the output (after the command execution).
OFF
– deactivates the output (after the command execution).
Pulse length
– if specified, the output will be active for the specified time. If the value is
«0» then the output will be activated on the next “ON” command.
Digital outputs
can be set
using the SMS-command
Setport
with the following
parameters:
Example:
setport 6,1
Terminal response : id(setport): OK
Indication on Р 6- Р 7 ports
The tracker possesses a wide range of self-diagnostics instruments(including event log,
debug journal, and state indication on the digital output).
For indication of the malfunction the external indicator can be connected on the output.
Figure 82. State indication
In order to achieve that «Current state indication» it should be configured on one of the
P6, P7 ports (
Figure 82
). Two functions can be activated:
Sensors «Status Flag» and «error word» are send to the server.
If any error occurs, then the output is activated.
Port value send to server is a bitwise error word, which can be used to decoded, if
needed.
Drive style on the Р6 - Р 7 ports
«Drive Style» sensors are used for speed controlling, sharp acceleration and high
deceleration of the vehicle.
The tracker should be properly mounted to the vehicle’s body. The linear calibration
and horizon establishment should be conducted.