Scout MT-700 ENT, Руководство по эксплуатации

Страница: 17 / 155

МТ-700 fleet tracking system 17
For MT-700 PRO, MT-700 PRO 285, MT-700 ENT the RS-485 port can be connected to a
J1708 bus and the fuel consumption, fuel level, and other parameters can be read.
J1708 access dependents on :
-
Vehicle manufacturer
-
Model
-
Year of manufacture
-
Vehicle package
-
Onboard controller settings
Before connecting to a vehicle J1708-bus it is recommended to check that
connection will not lead to any vehicle malfunction or the vehicle J1708-bus failure.
Unlawful J1708-bus intervention can lead to the vehicle units’ breakdown and/or CAN-bus
failure. Be cautious when connecting the tracker to an onboard J1708-bus.
LLS and ScoutNet protocols are incompatible .
Connecting the LLS on the ScoutNet port can lead to a
malfunctioning device.
The Omnicomm LLS fuel level sensors should be calibrated through the
manufacturer’s software.
For MT-700 PRO and MT-700 PRO 285, if RS-485 port is used for LLS, the
configuration should be executed remotely or by using a USB-port.
For MT-700 PRO, MT-700 PRO 285, MT-700 ENT up to 16 RFID(using RFID protocol)
scanners can be connected.
For MT-700 STD if the LLS mode for RS-485 is selected, and the jumper ScoutNet/LLS
(fig.6) is not connected, then you can only remotely configure the devices.