Scout MT-700 ENT, Руководство по эксплуатации

Страница: 41 / 155

МТ-700 fleet tracking system 41
Figure 38. Launch Window of the “SCOUT Configurator”
Make sure that there is a device with the required ID in the device panel , then press
the “configuration” button .
Connecting the terminal to the software “Universal SCOUT Configurator” using the
“Configurator 485 v2.0”
Connection the terminal to the software “Universal SCOUT Configurator” should be
carried in the following order:
1.
Prepare the tracker: insert a SIM card, then insert the backup battery plug, then
connect the antennas.
2.
Plug the main terminal connector ( Figure 33 ) in the terminal-Configurator’s
adapter jack(4) ( Figure 31 ).
3.
In the tie-in connection, plug the jack’s second adapter into the corresponding
plug.
4.
Plug in the USB-cable ( Figure 35 ) into the Configurator (1).
5.
Plug in the USB cable to the computer’s USB-port.
6.
Launch the ”SCOUT Configurator” software.
7.
At the logging screen ( Figure 38 ) choose the connection type (local, remote, 485
Configurator and the corresponding COM-port (COM41 at the figure).
8.
Press the “OK” button to open the window.
9.
Make sure that there is a device with the required ID in the device panel , then
press the “configuration” button.