Scout MT-700 ENT, Руководство по эксплуатации

Страница: 51 / 155

МТ-700 fleet tracking system 51

The backup battery voltage is restored.

The supply voltage dropped down.

The panic button was pushed ignition was fixated, or the power was restored.
GSM connection rules
:
Home
– it is necessary that restoration for the for the GSM-network is in the home
network.
Any
– enabling roaming.
Restricted
– network registration is forbidden.
In the numeric field the operator code can be specified to allow registration using only
the specified cellular operators.
If the network registration cannot be achieved using the current method, then the
next rule applies.
Any rule stated above has the highest priority. The terminal will evaluate if it is
operating on the highest priority rule, if not then it will automatically alternate rules from
highest to lowest priority every 30 min.
GSM
registration rules can be set
using SMS-command
setnetrule with the following
parameters:

Rule number (1-6),

SIM-card number (1),

Operator code(0-99999).
value 1 indicates the possibility of registering only at the home network, value 2 – in
any network
Example of the command:
Setnetrule 1,1,25002
Terminal response: id(setnetrule): OK .
Event service settings
Event service “ОEC” (Online Equipement Control)
– is used for receiving and storing data on any
devices failure messages.
After an event occurs which requires date to be sent, the terminal connects to the OEC server
and transfers the data on all of the events that have occurred since the last data exchange.