Scout MT-700 ENT, Руководство по эксплуатации

Страница: 87 / 155

МТ-700 fleet tracking system 87
Figure 93. Driver identification sensor
Net number –
net number in ScoutNet (0 o 7).
Outside relay control – allows you to change the specified output state if the identification was
successful.
Inverting signal – allows you to change the specified output state of the digital output in case
identification was NOT successful.
Reconcile the driver ID – allows you to reconcile the identification with the white list, as written
in the terminal.
«White list» button – opens the white list dialogue (Figure 79), which provides the opportunity to
administrate the white list.
«Copy to buffer» button – is used to save the buffer of the captured ID.
Tachograph mode – using that mode, output control, ignition state control and indication are not
performed.
Figure 94. «White list» window
«Engine speed», «Distance travelled», «Passing beam», «High beam», «Seat belt» and
«Vehicle speed» can be obtained using the ScoutCAN. Those sensors have the following settings:
Net number
– net number in ScoutNet (0 o 7).
Port
– port number for the sensor
.
Sensor
– sensor number, providing the needed data.
Settings for the sensors are typical and can be set the same as the other sensors, as
mentioned in the manual.