SCM Olimpic K 1000, Инструкция по эксплуатации

Страница: 26 / 583

2
2.4
TECHNICAL DESCRIPTION
EN
INSTRUCTION MANUAL TRANSLATION OF THE ORIGINAL INSTRUCTIONS
1
2.3- 2.3- MACHINE DESIGNATION AND IDENTIFICATION
2.3.1- MACHINE DESIGNATION 2.3.1- MACHINE DESIGNATION
Designation of the machine and
its function
Edge banding machine fed by chain for working with wood
and material with similar physical characteristics. (For a short
and standard description of the machine
see par. 2.3.2
)
.
Type
Olimpic K 1000
2.3.2- MACHINE IDENTIFICATION 2.3.2- MACHINE IDENTIFICATION
The machine is identi Þ ed through a “Machine name plate” that is a silk-screened aluminium sheet
applied to its base using four rivets (
see FIG.1
).
The “machine name plate” (
FIG.2A or FIG.2B
) lists:
• Full manufacturer’s name and address
• “CE” mark
(if applicable)
and the following data:
DESIGNATION
BRD CAT LGN (Short and standard description of the machine and its
function-
see par. 2.3.1
)
.
MARCA
brand name
N° SERIE
serial number
TIPO
machine type
MODELLO
machine model
ANNO
year of construction
kg
weight
Un
rated voltage (volt)
~
number of phases (ac)
In
rated current (A)
f
frequency (Hertz)
Icc.
circuit breaker interrupt power (kA)
w.d.
number of the electrical diagram
COMP.
machine composition
REF.
internal references