SCM Olimpic K 1000, Инструкция по эксплуатации

Страница: 394 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RIP.24
EN
18 19
RIP/4.3- MACHINING WITH RADIUS / RADIUS MILLERS RIP/4.3- MACHINING WITH RADIUS / RADIUS MILLERS
a) Set-up for the largest thick edging machining (ABS, PVC, veneering ...)
The correct group positioning
(s. FIG.18) is automatically determined by the selection of the work
program (s. ch ap.7).
b) Set-up for the thinnest thick edging machining (ABS, PVC, veneering ...)
The correct group positioning
(s. FIG.19) is automatically determined by the selection of the work
program (s. ch ap.7).
If necessary, rotate the hand wheels (FIG.20-REF.1 and 2) to set the values, corresponding to the
edging thickness and indicated on the plates (FIG.21-REF.1) on the numeric indicators (FIG.20-REF.3
and 4) .