SCM Olimpic K 1000, Инструкция по эксплуатации

Страница: 420 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RFK.10 EN
RFK/2.2- ADJUSTMENT AND SIGNALLING DEVICES RFK/2.2- ADJUSTMENT AND SIGNALLING DEVICES
• Hand wheel (FIG.5-REF.1) for adjusting the upper vertical track feeler
It regulates the amount of material removed from the upper part of the edging.
• Numerical indicator (FIG.5-REF.2)
It serves as a point of reference for rotating the hand wheel (FIG.5-REF.1) .
• Hand wheel (FIG.5-REF.3) for adjusting the lower vertical track feeler
It regulates the amount of material removed from the lower part of the edging.
• Numerical indicator (FIG.5-REF.4)
It serves as a point of reference for rotating the hand wheel (FIG.5-REF.3) .
RFK/2.3- SAFETY SYSTEMS USED RFK/2.3- SAFETY SYSTEMS USED
The extractor hoods (FIG.6-REF.1) also serve to limit access to the tools, with the exception of the work
zone.
During machining, the unit is protected by the sound-proof cabin.
Each door is fi tted with a device to prevent the sound-proof cabin from being opened before the pre-set
time after a stop control has passed.
This time has been calculated to give the frequency converter time to stop the motors.
When the cabin is open, the unit cannot be operated.
MACHINE SAFETY SYSTEMS DESCRIBED IN PAR.5.4.