SCM Olimpic K 1000, Инструкция по эксплуатации

Страница: 92 / 583

5
5.6
SAFETY
EN
INSTRUCTION MANUAL TRANSLATION OF THE ORIGINAL INSTRUCTIONS
1
5.3- SAFETY DEVICES 5.3- SAFETY DEVICES
ALL OF THE SAFETY DEVICES MUST BE CONSTANTLY BE CHECKED FOR PROPER
FUNCTIONING AND EFFICIENCY.
DO NOT CAMPER WITH, EXCLUDE, REMOVE AND/OR REPLACE ANY OF THE SAFETY
DEVICES.
THE REPLACEMENT OF MALFUNCTIONING OR DAMAGED SAFETY DEVICES:
• HAS EFFECT ON MACHINE SAFETY
• MUST BE PERFORMED USING ONLY ORIGINAL SPARE PARTS SUPPLIED BY THE
MANUFACTURER (S. PAR. 2.1).
• CAN BE PERFORMED BY THE CUSTOMER’S MAINTAINENANCE PERSONNEL (DEPENDING
ON THEIR SPECIFIC PROFESSIONAL QUALIFICATIONS- S. PAR. 1.3)
ONLY IN THOSE CASES THAT ARE DESCRIBED IN THIS INSTRUCTIONS MANUAL.
• MUST BE PERFORMED ONLY BY THE MANUFACTURER’S TECHNICIANS (S. PAR. 1.3) IN
THOSE CASES THAT ARE NOT DESCRIBED IN THIS INSTRUCTIONS MANUAL.
5.3.1- FIXED GUARDS 5.3.1- FIXED GUARDS
• Control and command panel back guard ( FIG.1-REF.1 );
• Presser input guard ( FIG.1-REF.2 );
• feed track input guard ( FIG.1-REF.3 );
• Presser guards ( FIG.1-REF.4 );
• Feed track output guard ( FIG.1-REF.5 );
• Presser output guard ( FIG.1-REF.6 );
• Covering metal sheet ( FIG.1-REF.7 );
• Motor gear guard ( FIG.2-REF.1 );
• Pneumatic unit guard ( FIG.2-REF.2 );
• Electrical panel guard ( FIG.2-REF.3 );
• Lower guards ( FIG.2-REF.4 ).
ANY OTHER FIXED GUARDS FOR THE INDIVIDUAL WORK UNITS ARE GIVEN IN THE
RELATIVE USER’S INSTRUCTIONS.