Error messages
152
Operating Manual XCx 300 / 500 / 540 Version 09/08
0X02110042
G39 verboten bei Spiegeln / Drehen
(System n, Nnnn)
[G39 prohibited with mirroring/rotation
(System n, Nnnn)]
0X02110043
Unzulässiger Rampenwert (ACC)
(System n, Nnnn)
[Invalid ramp value (ACC)
(System n, Nnnn)]
0X02110044
Falsche Transformation
(System n, Nnnn)
[Incorrect transformation
(System n, Nnnn)]
0X02110045
G72 .. G75 fehlt
(System n, Nnnn)
[G72 .. G75 missing
(System n, Nnnn)]
14.3.4
0x0212 Error in automatic record insertion
The subsystem number is indicated in the first parameter, the number of the NC record in the second
parameter.
Error no.
Error text
Cause / Remedy
0x02120000 Radius / Fase zu groß
(System n, Nnnn)
[Radius/chamfer too large
(System n, Nnnn)]
In a CNC record you have programmed a
transition radius (RA..) or a transition
chamfer (RB..) whose starting position is
outside the programmed coordinates of the
CNC record in which the radius or the
chamfer is programmed or whose target
position would go beyond the coordinates of
the next CNC record.
0x02120001 Übergangsfase nicht erlaubt
(System n, Nnnn)
[Transition chamfer not allowed
(System n, Nnnn)]
In a CNC record you have programmed a
transition chamfer (RB..) that is not between
two G1 records.
0x02120002 Unerreichbare Position
(System n, Nnnn)
[Unreachable position
(System n, Nnnn)]
0x02120003 G02/03-Satz falsch programmiert
(System n, Nnnn)
[G02/03 record incorrectly programmed
(System n, Nnnn)]
0x02120004 Kreisendpunktfehler
(System n, Nnnn)
[Circle end position error
(System n, Nnnn)]
