SATO CT4-LX Скачать руководство пользователя страница 98

Страница: 98 / 564

Bluetooth Interface Connection (Optional)

The IP address of the product can be set through the product's [Wi-Fi] menu or the All-In-One Tool.

•

To use the printer driver, the communication protocol must be set to Status4. (The

initial value of the communication protocol for the product's wireless LAN interface is

Status4 ENQ.)

•

The product does not support Atheros, SuperG, or XR functions.

Bluetooth Interface Connection (Optional)

Check if the wireless LAN/Bluetooth kit (1) is attached to the product.

Wireless communications is possible with Bluetooth-compatible computers that are placed within

about 10 m (32.8 feet) of the product.
Make sure that the Bluetooth function of the product and the computer are enabled, and then add the

product as a Bluetooth device on the computer.
The product's Bluetooth function is enabled by default and can be configured from the [Bluetooth]

menu or the All-In-One Tool.

•

Bluetooth connection may be unstable depending on a module spec or version of

Bluetooth. When using Bluetooth connection, please test the operation beforehand in

your usage environment (computer, print data, print quantity, print frequency, etc.).

•

To use the printer driver, the communication protocol must be set to Status4. (The

initial value of the communication protocol for the product's Bluetooth interface is

Status4 Multi.)

Содержание CT4-LX




















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CT4-LX

Отзывы:

SATO CT4-LX, Руководство оператора, Страница: 98 / 564

Результаты поиска

Содержание CT4-LX

Отзывы: