
203
[Time] (SOS users only)
Specifies the time of the specified day or date to perform periodic notifications.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Weekly] or [Monthly] in the [Type] menu.
[Update Screen] (SOS users only)
Sets whether to print a QR code displayed with SOS (SATO Online Services) periodic notification or
Daily Checkup.
Available only if you have selected [On-Demand] in the [SOS Mode] menu.
A specialized application is required to scan the QR code.
The options are as follows:
Normal
Shows the scan screen of a normal QR code.
You can execute printing in the scan screen for the QR code. Tap [PRINT] to print the QR code.
To print the QR code, use media of more than 40 mm (1.57") in length and more than 40 mm
(1.57") in width (not including the liner).
[QR code offset] (SOS users only)
Adjust the print position for printing a QR code displayed on the notification screen for SOS (SATO
Online Services).
Available only if you have selected [On-Demand] in the [SOS Mode] menu.
Available only if you have selected [Print] in the [Update Screen] menu.
The setting items are as follows:
Vertical
Adjust the print position of the QR code in the vertical direction.
Set the correction value from the print reference position as "-" for the direction of the paper feed
and "+" for the direction opposite to the paper feed.
The setting range is from -792 to +792 dots.
Содержание CT4-LX
