
209
Normal
Use a standard antenna (adjustable).
With the SATO RF Analyze function, you can automatically adjust the position of the standard
antenna to suit the RFID tag you are using. You can record the results of the automatic
adjustment in [RFID Tag Model]. Or, you can manually adjust the position of the standard antenna
with [RFID Tag Model].
Front
Use a short pitch antenna (fixed position).
[Write Power]
Set radio power level used to write information to inlays according to the Inlay Configuration Guide.
For details, access the following URL:
https://www.sato-global.com/rfid/guide.html
To use inlays that are not in the Inlay Configuration Guide, contact your SATO sales representative or
reseller.
The setting range is from 0 to 27 dBm.
•
The changes to this setting are linked and are changed with the settings in the [SATO
RF Analyze] > [Write Power] menu.
[Read Power]
Set radio power level used to read information from inlays according to the Inlay Configuration Guide.
For details, access the following URL:
https://www.sato-global.com/rfid/guide.html
To use inlays that are not in the Inlay Configuration Guide, contact your SATO sales representative or
reseller.
The setting range is from 0 to 27 dBm.
•
The changes to this setting are linked and are changed with the settings in the [SATO
RF Analyze] > [Read Power] menu.
[Tag Offset]
Set the offset value and the writing operation for when data is written to an inlay.
The setting items are as follows:
[Tag Offset]
Set the position at which to start writing data to the inlay. Data is written to an inlay on each tag at the
point where the inlay passes over the product's RFID antenna, which is at the distance, from the print
start position, specified in this setting.
This setting will be used when inlays are not compatible with the product’s antenna positions. For
details, access the following URL:
https://www.sato-global.com/rfid/guide.html
To use inlays that are not in the Inlay Configuration Guide, contact your SATO sales representative or
reseller.
Содержание CT4-LX
