
199
The setting items are as follows:
[SOS Mode] (SOS users only)
Select the mode of SOS (SATO Online Services) or disable SOS.
The options are as follows:
Disabled
Disables SOS.
On-Demand
Shows the product information with a QR code. Scan the displayed QR code with a tablet or
smartphone and send the information to the SOS cloud. Also, the product information can be
acquired via NFC and sent to the SOS cloud. This connection allows you to check the product's
operating information via SOS Web. A specialized SOS application is required to scan the QR
code or send the product information to the SOS cloud.
Real-Time
Sends the product information to the SOS cloud in real-time using the LAN/wireless LAN
connection. This connection allows you to check the product's operating information and to check
or modify the product's settings via SOS Web. Confirm and agree with the Terms of Use to enable
the Real-Time mode.
Light
Sends the product information to the SOS cloud in real-time using the LAN/wireless LAN
connection. This connection allows you to check the product's operating information via SOS
Web.
[Allow Remote Control] (SOS users only)
Set whether or not to allow setting the product (remote control) from SOS (SATO Online Services).
Available only if you have selected [Real-Time] in the [SOS Mode] menu.
The options are as follows:
Deny
Does not allow remote control from SOS.
Until Reboot
Allows remote control from SOS until the product reboots.
Always
Always allows remote control from SOS.
[MQTT Protocol] (SOS users only)
Set the communication protocol of MQTT.
Available only if you have selected [Real-Time] in the [SOS Mode] menu.
The options are as follows:
MQTT
Set this to use port number 443 and 8883 to do MQTT communication.
Содержание CT4-LX
