
[Advanced]
180
Do not feed the media when changing to Online mode after recovering from an error.
However, if [Feed At Power On] is enabled, the product feeds the media when it is powered on
and changes to Online mode.
Also, if [Auto Measure] is enabled, the product feeds the media when it changes to Online mode
for the first time after being powered on.
[Feed At Power On]
Set whether to automatically feed the media when the product is powered on.
Can be set if [Label Waste Prevention] is disabled.
The product feeds the media when it changes to Online mode for the first time after being
powered on.
The media is not fed when the product is powered on.
However, if [Auto Measure] is enabled, the product feeds the media when it changes to Online
mode for the first time after being powered on.
[Label Waste Prevention]
Set the Label Waste Prevention function.
This is not displayed if the optional dispenser unit or linerless cutter unit is installed.
The setting items are as follows:
[Enable]
Enable or disable the Label Waste Prevention function.
Can be set if [Feed After Error] and [Feed At Power On] are disabled.
•
To enable this, on the [SETTINGS] menu, use [Tools] > [Media Startup] or [Media
Profiles Registration] to batch set the settings related to the Label Waste Prevention
function.
•
The changes to this setting are linked and are changed with the settings in the [Tools] >
[Media Startup] menu.
•
When using linerless labels, journal paper, or RFID tags, you cannot use the Label
Waste Prevention function.
[Registered Label Length]
To accurately execute the Label Waste Prevention function, register the length of the media you are
using. If you do not register the media length, the second and following labels may be fed blank.
Appears when the following conditions are met.
•
[Label Waste Prevention] > [Enable] is enabled.
•
On the [Printing] > [Media Type] menu, [Label] is selected.
Содержание CT4-LX
