SATO CT4-LX Скачать руководство пользователя страница 284

Страница: 284 / 564

[Authentication]

284

[Firm Version]

Shows the firmware version of the Bluetooth. (You cannot change this value.)

[Host BD Address]

Check the Host BD address.

[Pairing]

Pair the product with a Bluetooth device.
The items are as follows:
Available devices

The product searches for a Bluetooth device and shows the name of the device.

Paired devices

Shows a list of previously paired device. Select a device to delete from the list.

•

Only devices with an HFP, HSP, or HID Bluetooth profile appear in [Available devices].

For example, a headset, keyboard, or barcode scanner.

[IAP Ready]

Shows the operational status of the IAP authentication chip, enabling the communication between an

iOS-equipped device and a Bluetooth device.

When the communication is enabled,

is displayed.

[iOS Reconnect]

Disable the iOS reconnect function or set to the Manual mode.
The options are as follows:
Disabled

The product does not perform iOS reconnection. You need try reconnection from iOS device.

Manual

The product performs iOS reconnection when the product is powered on or it switches to online or

offline.

[Authentication]

Set the authentication level.
The options are as follows:

Содержание CT4-LX




















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CT4-LX

Отзывы:

SATO CT4-LX, Руководство оператора, Страница: 284 / 564

Результаты поиска

Содержание CT4-LX

Отзывы: