
[Compatible]
248
[SBPL]
Set the compatible mode for SBPL.
The setting items are as follows:
[CODE128(C) Zero Fill]
Set whether to allow odd digits and print the barcode with zero-filling when start code C is used in
CODE128.
Allow odd digits and print the barcode with zero-filling.
Do not allow odd digits. A command error occurs and the data will not be printed.
[Kanji Command]
Set the product behavior when the received data includes the Kanji command <K5>, <K6>, or <K7>.
Change the Kanji commands <K5>, <K6>, and <K7> in the received data to the proper
commands, and then print.
◦
<K5>: 16 x 16 dots Kanji in horizontal line with one-byte character
◦
<K6>: 24 x 24 dots Kanji in horizontal line with one-byte character
◦
<K7>: 22 x 22 dots Kanji in horizontal line
Do not change the Kanji commands <K5>, <K6>, or <K7> in the received data. The product
behavior when it receives these commands is as follows:
◦
<K5>: Print with 40 x 40 dots Kanji in horizontal line.
◦
<K6>: A command error occurs and barcode is not printed.
◦
<K7>: A command error occurs and barcode is not printed.
[Call Font/Logo]
Set how to process the character code specified in recall font & logo <RF> command.
Character codes are processed in little-endian format.
Character codes are processed in big-endian format.
Содержание CT4-LX
