
[Notifications]
242
By enabling this function, the [Language] icon is added to the [SETTINGS] menu screen as below. You
can directly access the display language setting screen.
[Notifications]
Set the function to notify when to clean and replace parts.
The setting items are as follows:
[Clean Printhead]
Notify when the print head needs to be cleaned.
The setting items are as follows:
[Clean Printhead]
Enable or disable the notification function about when the print head needs to be cleaned.
[Cleaning Interval]
Set the notification interval about when the print head needs to be cleaned.
You can change the setting only if you enabled the [Clean Printhead] menu.
The product shows the print distance as a setting value. The setting range is from 10 to 1,000 m.
[Clean Counter]
Shows the current print distance.
[Change Printhead]
Notify when the print head needs to be replaced.
The setting items are as follows:
[Change Printhead]
Enable or disable the notification function about when the print head needs to be replaced.
[Printhead Interval]
Set the notification interval about when the print head needs to be replaced.
You can change the setting only if you enabled the [Change Printhead] menu.
The product shows the print distance as a setting value. The setting range is from 10 to 100 km.
Содержание CT4-LX
