
[Wi-Fi Setting]
290
Auto
Automatically generate the IP address, prefix length, default gateway address, and DNS server
address (stateless mode).
DHCP
Automatically acquire the IP address, prefix length, default gateway address, and DNS server
address from the DHCP server (stateful mode).
Static
Manually set the IP address, prefix length, default gateway address, and DNS server address.
[DHCP]
Update the lease time and get the IP address from the DHCP server again.
Available only if you have selected [DHCP] in the [Mode] menu.
[IP Address]
Set and check the IP address.
If you have selected [Auto] or [DHCP] in the [Mode] menu, the screen shows the IP address you
acquired.
If you have selected [Static] in the [Mode] menu, set the IP address.
The setting range is as follows:
0:0:0:0:0:0:0:1 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[Prefix Length]
If you have selected [Static] in the [Mode] menu, set the prefix.
The setting range is from 1 to 128.
[Gateway]
Set and check the default gateway address.
If you have selected [Auto] or [DHCP] in the [Mode] menu, the screen shows the gateway address you
acquired.
If you have selected [Static] in the [Mode] menu, set the default gateway address.
The setting range is as follows:
0:0:0:0:0:0:0:0 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
•
The gateway address set here is shared with the settings in [Interface] > [Network] >
[Settings] > [LAN] > [IPv6 (LAN)].
[DNS]
Set and check the address of the primary DNS server.
If you have selected [Auto] or [DHCP] in the [Mode] menu, the screen shows the DNS server address
that was acquired.
If you have selected [Static] in the [Mode] menu, set the address of the DNS server.
The setting range is as follows:
0:0:0:0:0:0:0:0 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Содержание CT4-LX
