manualshive.com logo in svg

SATO CT4-LX, Руководство оператора, Страница: 76 / 564

Поделиться
Скачать
SATO CT4-LX Скачать руководство пользователя страница 76

Connecting the AC Adapter and the Power Cord

76

Powering On/Off the Product

Connecting the AC Adapter and the Power Cord

 

•

Do not connect or disconnect the power cord while your hands are wet. Doing so could

cause an electric shock.

•

Make sure that the AC voltage of your region is in the range of AC 100 - 240 V, 50 -

60 Hz. If your local voltage is not in the stated range, contact your SATO reseller or

technical support.

 

•

The attached power cord and AC adapter are designed exclusively for this product. Do

not use them with other devices.

 

1. Connect the AC adapter and the power cord to the product.

 

a. Connect the AC adapter (1) and the power cord (2) ( ).
b. Insert the AC adapter plug (3) into the DC input connector at the rear of the product ( ).
c. Insert the power plug into an AC outlet ( ).

 

 

•

The shape of the power plug varies depending on the region in which it was

purchased.

 

Содержание CT4-LX





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов