SATO CT4-LX Скачать руководство пользователя страница 45

Страница: 45 / 564

Icon

Description

The periodic notification in the On-Demand mode of SOS as set previously has

arrived. Scan the QR code and send the information to the SOS cloud.

LAN or Wi-Fi is connected, but an IP address has not been assigned to the

product. Or a communication error has occurred.

USB Memory Status

Icon

Description

USB memory is connected.

Print Job Status

Icon

Description

Waiting for media removal. Remove the media.

Ribbon is near the end. The rest of the ribbon is decreased. Prepare a new

ribbon.

Command error detected. Check the print data.

Receive buffer is nearly full. Wait until the product starts printing the previously

sent data, and then send the next data.

Содержание CT4-LX




















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CT4-LX

Отзывы:

SATO CT4-LX, Руководство оператора, Страница: 45 / 564

Результаты поиска

Содержание CT4-LX

Отзывы: