30 ACU-220
SATEL
7. Click on the “Write” button to save changes to the controller (these data will not be saved
after clicking on the
button in the main menu).
LCD keypad
You can remove a wireless device in the service mode, using the “Remove device” function
(
“2.Hardware”
“1.Kpds. & exps.”
“3.Wireless dev.”
“ 3.Remove device”).
1. Start the “Remove device” function.
2. List of wireless zones will be displayed.
3. Use the
and
keys to select the zone to which the device you want to remove is
assigned.
4. Press .
5. A prompt will be displayed asking you whether to remove the device (type and serial
number of the device will be displayed).
6. Press the key 1.
7.1.3 Universal module of wireless devices
To add and remove devices, you can use the ABAX 2 Soft program (see “ABAX 2 Soft
program” p. 11).
You can register up to 48 devices in the controller.
7.1.3.1 Adding new wireless devices
You can add a wireless device in the “Devices” tab.
1. Click on . Data on wireless devices will be read from the controller.
2. Click on
.
3. The “Adding devices” window will be displayed.
4. In the “Serial number” field, enter the serial number of the device to be added.
5. Power on the device (install the battery in the device, turn on the device power, etc.).
6. A message will confirm that the device has been added (unless you have entered an
invalid serial number, of which the message will inform you).
6.1. Device type will be displayed.
6.2. The device name will be displayed. You can change that name. If the device
occupies two or more positions on the device list, the name will be repeated in all
positions.
6.3. For some devices you can select if the device is to occupy one or two positions on
the list of devices.
6.4. You can select which position(s) the device is to occupy on the list of devices.
7. Click on
.
8. The “Adding devices” window will close.
9. The new device will be displayed on the list of devices.
10. Click on
. The new device data will be written to the controller.
7.1.3.2 Removing wireless devices
You can remove a wireless device in the “Devices” tab.
1. Click on . Data on wireless devices will be read from the controller.
2. Click on the device you want to remove (if the device occupies two or more positions on
the list, you can click on any of them).
