SATEL ACU-220
25
Fig. 18. DLOADX
program: the list of wireless devices registered in the controller connected
to INTEGRA / INTEGRA Plus control panel.
7.1.1.1 Adding new wireless devices
DLOADX program
You can add a wireless device in the “Structure” window, “Hardware” tab, after clicking on the
name of the controller on the device list, and then on the “Zones/Outputs” tab
The device being added is assigned to zones and outputs automatically (to the first
unoccupied zones / outputs from the pool reserved for the controller).
1. Click on the “Read” button. The data related to wireless devices will be read from the
controller (these data are not read after clicking on the
button in the main menu).
2. Click on the “New device” button.
3. The “New device” window will open.
4. Enter the serial number of the device being added in the “Serial number” field.
5. Power on the device (install the battery in the device, turn on the device power, etc.).
6. A message will confirm that the device has been added (unless you have entered an
invalid serial number, of which the message will inform you).
6.1. Device type will be displayed.
6.2. A new name of the zone to which the device is to be assigned will be displayed. You
can change the name. If the device occupies two or more positions on the device list,
the same name will be given to the other zones. If the device is to be assigned to
outputs, the outputs will be given the same name.
6.3. For some devices you can select if the device is to occupy one or two positions on
the list of devices.
7. Click on the “OK” button.
8. The “New device” window will close.
9. The new device will be displayed on the list of devices.
