52 ACU-220
SATEL
Adding a keyfob
Entering the serial number manually
1. Click on the field in the “S/N” column next to the name of the user to whom you want to
assign a keyfob.
2. Enter the keyfob serial number and press ENTER.
Reading the serial number during transmission
1. Click on the field in the “S/N” column next to the name of the user to whom you want to
assign a keyfob.
2. Click on the “New device” button.
3. The “New” window will open.
4. Press the keyfob button.
5. When the keyfob serial number is displayed in the window, click on the “OK” button.
6. The “New” window will close.
7. The serial number of the new keyfob will be shown in the “S/N” column.
Assigning a function to keyfob button (combination of buttons)
1. Right click on the field corresponding to the button (combination of buttons).
2. The list of functions will be displayed.
3. Click on the function to be run by the keyfob button (combination of buttons).
Assigning information to a LED
1. Right click on the field corresponding to the LED.
2. The list of information that can be presented by the LED will be displayed.
3. Click on the information items to be presented.
Removing a keyfob
1. Click on the field in “S/N” column next to the name of user whose keyfob is to be
removed.
2. Click on the “Delete” button.
3. The “Confirm” window will open.
4. Click on the “Yes” button.
5. The “Confirm” window will close.
6. The keyfob serial number shown in the “S/N” column will be erased.
9.2 Universal module of wireless devices
Using a keyfob, the user can control six outputs of the controller. Pressing a keyfob button(s)
will turn on the output for a preset period of time or will change the output state to the
opposite one. You can define how the outputs should operate when configuring the controller
settings from the ABAX 2 Soft program (see “Configuration” p. 13).
After pressing any keyfob button (which do not have to control any controller output),
information about the state of three controller inputs will be presented on the keyfob LEDs for
a few seconds. The LED is ON when:
the NO type input is closed,
the NC type input is open.
9.2.1 Keyfob management
You can manage the keyfobs using the ABAX 2 Soft program (see “ABAX 2 Soft program”
p. 11).
