SATEL ACU-220
11
If you use the twisted-pair type of cable, remember that the DTM and CKM / CKE and DTE
(clock and data) signals must not be sent through one pair of twisted conductors. The
conductors must be run in one cable.
Optionally, you can connect signaling devices to the outputs indicating problems in the
ABAX 2 system.
4.5.2 Universal module of wireless devices
1. Connect the control input terminals to the control panel outputs or other device(s) that are
to control the operation of wireless devices.
2. Connect the terminals of programmable outputs to the control panel zones or other
device(s) that are to be controlled by the module.
3. Connect the terminals of outputs indicating problems in the ABAX 2 system to the control
panel outputs or other device(s) to which the information about problems is to be sent.
4.6 Connecting the power supply and starting the controller
1. Connect the power cables to the +12V and COM terminals. The controller may be
powered directly from the control panel or from a power supply unit with current limitation
up to 3 A.
2. Replace the cover and then lock it with the screws.
3. Turn the power on. The LED indicator should come on.
If the controller works as expander of wireless devices for SATEL alarm control
panels, run the identification function in the control panel (see the control panel
installer manual). The controller will be identified as ACU-100.
5
ABAX 2 Soft program
The ABAX 2 Soft program enables configuration and diagnostics of the wireless system
when the controller works as universal module of wireless devices. The program can also be
used for diagnostics of the system, when the controller works as expander for a SATEL
control panel.
You can download the ABAX 2 Soft program from www.satel.eu website.
5.1 Description of the program
5.1.1 Menu bar in the program
The menu bar is displayed in the top part of the program window.
Fig. 8. ABAX 2 Soft program: menu bar.
type of controller and firmware version.
number of the computer port used for communication with the RS-232 (TTL) port of the
controller.
